UV-VIS Spectrophotometer

Double Beam Microprocessor
Variable Bandwidth
Eight Cell Holder
With Peltier Temperature Controller and Sipper System
(Original / Premium with Japanese Technology)

Principle

Double Beam Microprocessor (Variable Bandwidth) (Eight Cell Holder) (With Peltier Temperature Controller and Sipper System)

DOUBLE BEAM UV-VIS Spectrophotometer with more accuracy and flexible requirements. The two detectors are used to measure sample and reference respectively and simultaneously for optimizing measurement accuracy.It has wide wavelength range satisfying requirement of various fields, such as biochemical research and industry, pharmaceuticals analysis and production, education,environment, protection, food industry etc.

UV-VIS Double Beam Spectrophotometer
UV-VIS Double Beam Spectrophotometer
UV-VIS Double Beam Spectrophotometer
UV-VIS Double Beam Spectrophotometer
UV-VIS Double Beam Spectrophotometer
Wide Wavelength range, satisfying requirements various fields.
Fully automated design, realizing the simplest measurement & satisfyin g the requirement of pharmacopeia.
Maximum of 9 Wavelength & 8 Sample can be measured at one time.
Automatic change - over Between W lamp & D2 lamp.
Optimized optics and large scale integrated circuits design, light source and receiver From world famous measurement methods all add up to high performance and reliability.
Rich measurement methods: wavelength scan, time scan, multi wavelength Determination multi–order derivative determination,double-wavelength method and triple wavelength methods etc,meet difference measurement requirement.
Automatic 10 mm 8 - cell holder.
Data Output can be obtained via a printer port and a USB interface.
Parameters and data can be saved for user's convenience.
PC controller measurement can be achieved for more accurate and flexib l e requirement.
Glass Cell 4 Nos.
Quartz Cells 2 Nos.
Instruments Cover 1 Nos.
Software CD 1 Nos.
USB Cable 1 Nos.
Operational Manual 1 Nos.
Software Manual 1 Nos.
Software Key 1 Nos.
Flow Cell 1 Nos.
Medicine/Pharmaceutical Industries
Environmental Monitoring
Commodity Inspection
Food Quality Inspection
Agricultural Chemistry
Colleges & Universities
Mettallurgy Science
Geology
Machine Industries
Petrochemical Industries
Water and Waste Water Labs
Foods and Beverages Labs
Optical System D ouble Beam ( 1200 Lines/nm Grating )
Wavelength Range 1 90-1100nm
Mode B asic/Quantative/Wavelength Scan/DNA Protein Test/Kinetics/Multi Wavelength Mode
Scanning Speed F ast/Medium/Low
Band Width 0 .5/1.0/2.0/4.0 nm.
Wavelength Accuracy ± 0.3nm
Wavelength Repeatability 0 .2nm
Photometric Accuracy ± 0.3 % T
Photometric Repeatability 0 .2 % T
Photometric Display Range 0 -200% T, -0.3 -3.0A, 0 – 9999 C
Stability 0 .001 A/h @500 nm
Baseline Flatness ± 0.001A
Noise ± 0.001A
Stray Light < 0.05%@220nm&360nm
Data Output Port USB
Printer Port Parallet Port
Display Graphic LCD ( 320×240 Dots )
Lamps Deuterium Lamp & Tungsten Halogen Lamp
Detector Silicon Photo diode
Packing Dimension 625x430x206 nm
Weight 26 kg
Technical specification of peltier/sipper system
The valid temperature range is from 15°c to 65°c
The valid sampling time range is from 30s to 10min,
The valid peristaltic pump speed range is from 1 to 12
The sampling speed is about 50ml/min.
Power supply is 220±22V@50±1Hz or 110±11V@60±1Hz.
Control Unit.
Cell holder with Peltier System. (It's already pre-loaded into the compartment of the Spectrophotometer).
Control Cable (to connect the Control Unit with the Cell holder with Peltier System).
Peristaltic pump pipe. (It's already pre-loaded into the pump valve of the Control Unit)
Power cord.
(a) Digital Timer of 99 Hrs with built in alarm system after set time.
(b) Calibration Certificate of Digital Temperature Controller.
(c) Calibration certificate of digital temperature indicator cum controller issued by NABL accredited lab
ISO -9001:2015
ISO-13485:2012
IEC 61010-1-2:2001/IEC-60601
CE Certificate
WHO GMP Certificate
IQ/OQ/PQ/DQ Certificates (Optional)
Working Manual
Factory Testing Certificate for
(a) Digital Temperature Controller Calibration certificate (Optional)
(b) Stainless steel test certificate (Optional)
Basic Mode

To measure the Absorbance and transmittance

UV-VIS Double Beam Spectrophotometer
Quantitative
  • Coefficient Method.
  • Standard Curve Up to 10 Standard sample may be used to establish a curve. Four methods for fitting a curve through the calibration points : (Linear fit, Linear fit through zero, Square fit and cubic fit)
UV-VIS Double Beam Spectrophotometer
DNA/Protein Test

Concentration and DNA purity are quickly and easily calculated: Absorbance rations: 260 nm / 280 nm with optional subtracted absorbance at 320 nm. DNA concentration = 62.9XA260-36.0XA280 Protein concentration = 1552xA260-757.3xA 280

UV-VIS Double Beam Spectrophotometer
Wavelength Scan
  • The wavelength scan intervals are 0.1,0.2,0.5,1,2,5 nm
  • High Medium and low scan speed are available. They vary from 100 to 3600 nm/min
  • Wavelength are scanned from high to low so that the instrument waits at high wavelength and it minimizes the degradation of UV sensitive samples.
UV-VIS Double Beam Spectrophotometer