B.O.D Incubator

WITH REMOTE SERVICE LINE

Principle

Waiometra B.O.D. Incubator is based on the principle to provide preset controlled temperature conditions in an enclosed area irrespective of the changes in the ambient conditions of the environment.

B.O.D Incubator
Feather touch controller, plate mounted on the door.
Digital Display L. E. D + L. C. D. Both.
Continuous display of set temperature, attained temperature, time, day, date, etc.
As soon as the set temperature is attained, timer start automatically & raise the alarm after the set time is over (Fully automatic).
LED indicator for door open, power failure, sensor failure.
Battery operated controller with indication of power failure.
70% higher uses through trouble free adjustment of trays anywhere at a gap 4cms.
Energy Efficient .
CFC free refrigerant.
Long life.
Low Maintenance.
Guaranteed supply of Spares & Service for 10 years.
Onsite installation and after sales service by company trained engineers.
Safety Features
M. C. B. is provided at the mains of the connection.
Overheat Protection controller is provided additionally which protects in case of controller failure.
Fuses are provided on every electrical line to safeguard each and every component.

WaiometraB.O.D. Incubator is ideal for research & development laboratories, industrial, medicine for biochemical's oxygen demand enzymatic, serum & sewage studies, storage of heat sensitive vaccines, insulin, lever extract, pharmacy medicines etc.

B.O.D. Determinations
Plant and Insect Studies
Biomedical research laboratories
Chemical
Biotechnology Industries
Medical application
Laboratory application
Microbiological laboratory
Bacteria, virus and other pathogens handling
Working Temp. 5oC to 60oC or 10oC to 60oC when lights are ON.
Temp. Accuracy ± 1oC (or 0.5oC under ideal conditions)
Temp. Readability 0 .1oC
Power supply 220V, 50Hz, Single Phase AC supply
Construction
Inner chamber Made of S. S. 304 grade or S. S. 316
Outside Made of Mild Steel duly painted or S. S. 304
Inside Door Fitted with unbreakable transparent acrylic
Outer Door Thick, insulated, powder coated
Compressor Fitted with standard make Kirloskar/Shriram/Similar
Circulating Fan 2 Nos. fitted inside the chamber
Shelf 3 Nos. made of S. S. wire. The trays can be adjusted anywhere at a distance of 4cms.
S.No. Inside SS 304 &
Outside M.S.
Inside & Outside
both SS 304
Inside SS 316 & Outside SS 304 Size of Inside Chamber (H x W x D) Volume cu.ft. Capacity Ltrs
(a) BOD-5642M BOD-5642S BOD-5642S 316 560mm x 420mm x 380mm 3 cu.ft 85Ltrs
(b) BOD-6145M BOD-6145S BOD-6145S 316 610mm x 455mm x 410mm 4.5 cu.ft. 128Ltrs
(c) BOD-8450M BOD-8450S BOD-8450S 316 840mm x 500mm x 410mm 6 cu.ft. 170 Ltrs
(d) BOD-9958M BOD-9958S BOD-9958S 316 990mm x 580mm x 490mm 10 cu.ft. 285 Ltrs
(e) BOD-1062M BOD-1062S BOD-1062S 316 1020mm x 620mm x 520mm 12 cu.ft. 340 Ltrs
(f) BOD-7064M BOD-7064S BOD-7064S 316 700mm x 640mm x 900mm 15 cu.ft. 421Ltrs
(a) Interior illumination with 3 Nos. of flourescent tubes to attain the temperature from 10oC to 60oC when all tubes are ON with 0-24 hrs cyclic timers (Pls suffix FT for cat. no.)
(b) Recommended Voltage Stabilizer (Pls suffix VS for cat. no.).
(c) Arrangement of humidity control 55 to 90% ± 5% with digital humidity controller (Pls suffix HC for cat. no.).
(d) Port of computer interface. (Pls. suffix C for cat. no.).
(e) Spare Shelf (Pls suffix S for cat. no.).
(f) Digital temperature controller calibration certificate by test house traceable to NPL or NABL accredited Lab.
(g) Q/OQ/PQ/DQ certificates.
Buyer's Obligations
(a) At all time of ordering. Please specify the name of chemicals/solvents to be used so that we can check the compatibility of the conta ct parts of the instruments. (We are not responsible for any compatibility problem if not specified with the order.)
(b) Water supply within one meter distance from the site of Fume Hood.
(c) Electrical connection 3 phase 440 volts with in one meter distance from the site of Fume Hood.
(d) Drainage system near the unit.
(e) Suitable space for exhaust pipe nearest possible at around 10 ft height.
(f) The equipment is big bulky & heavy. Please check the door size & passage to the desired lab. It is recommended to place the unit on ground floor only.
(g) These fume hoods are not compatible with Hydrofloric acid.
(h) However special model available for Hydrofloric acid fumes on request.
ISO -9001:2008
ISO-13485:2012
IEC 61010-1-2:2001/IEC-60601
CE Certificate
NSIC & SSI Regn. Certificate
Factory Testing Certificate for
(a) Stainless steel test certificate (Optional)
(b) Digital temperature controller calibration certificate
IQ/OQ/PQ/DQ Certificates (Optional)
Digital temperature controller calibration certificate by test house traceable to NABL accredited Lab (Optional)